FAQ

How to winterize a yamaha outboard?

Do you have to winterize a 4 stroke Yamaha outboard motor?

Many Yamaha outboard motor owners live in climates where they are taken out of service for the winter months, which means winterizing their outboards is a must. Winterizing your outboard motor is one of the most important maintenance you can perform as a boat owner.

How do you winterize a 4 stroke Yamaha outboard?

How to Winterize Yamaha 4-stroke Outboards

  1. Start using something like Startron regularly about a month before winterization, or at least run it through on your last excursion.
  2. Top off your gas tank and add proper amount of stabilizer.
  3. Run on muffs, using Salt Away or similar product.

Is it necessary to fog a 4 stroke outboard?

Fog the Engine Ideally while the motor is still warm, treat four-stroke and conventional two-stroke engines with fogging oil to prevent corrosion within the engine. Remove the spark plugs and spray the fogging oil directly into each cylinder, following the directions on the can.

How do you winterize a 4 stroke boat motor?

Winterizing Your Outboard Motor

  1. Drain the crankcase oil (Four-stroke motors)
  2. Install a new oil filter (Four-stroke motors)
  3. Filling the crankcase with new oil (Four-stroke motors)
  4. Changing the lower unit gear oil.
  5. Stabilizing the fuel.
  6. Flushing the outboard with antifreeze.
  7. Fogging the cylinders.

Do I need to use fogging oil?

If you have any type of vehicle that sits in storage for months at a time, you should look into using fogging oil if you want to protect the engine. This product offers a way to keep inactive engine components from becoming corroded over time.

How long should I flush my Yamaha outboard?

It only takes 10 to 15 minutes to adequately flush the engine, and I do it while I accomplish other tasks. I’ll hook the hose up to the flush attachment, turn the water on (not the outboard), and then get in my boat to unload everything that needs to come off and clean out the cooler.

How do you de winterize a 2 stroke outboard motor?

How to De-winterize Your Boat

  1. Take the Tarp Off. Before you do anything, you need to get the tarp or covering off your boat. …
  2. Check the Engine. …
  3. Refill the Cooling System. …
  4. Check Water Pumps and Thermostats. …
  5. Check Cables and Hoses. …
  6. Check Your Battery. …
  7. Clean the Distributor. …
  8. Check the Fuel System.

How do I winterize my outboard motor?

Winterizing Your Outboard Motor

  1. Drain the crankcase oil (Four-stroke motors)
  2. Install a new oil filter (Four-stroke motors)
  3. Filling the crankcase with new oil (Four-stroke motors)
  4. Changing the lower unit gear oil.
  5. Stabilizing the fuel.
  6. Flushing the outboard with antifreeze.
  7. Fogging the cylinders.

Do you have to winterize a 4 stroke Yamaha outboard motor?

Many Yamaha outboard motor owners live in climates where they are taken out of service for the winter months, which means winterizing their outboards is a must. Winterizing your outboard motor is one of the most important maintenance you can perform as a boat owner.

Where should I spray fogging oil?

Before the engine runs out of fuel, spray fogging oil into the carburetor(s). Fogging oil is an anticorrosive that will protect the internal surfaces of the carburetor and the cylinders. Typically the engine will run rough just before it runs out of fuel.

How do you store a Yamaha 4 stroke outboard?

https://www.youtube.com/watch?v=ksOo1zoJdGg

Maybe you are interested in:

how to build boat trailer guides?

Related searches

  1. how to fog a yamaha 4 stroke outboard
  2. yamaha outboard winterization kit
  3. how to store a yamaha outboard motor
  4. winterize 40 hp yamaha outboard
  5. how to winterize a yamaha hpdi 200
  6. antifreeze yamaha outboard

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button