How to winterize jet ski sea doo?

Do you have to winterize a Sea-Doo jet ski?

Winterizing your watercraft is imperative to ensuring your Sea-Doo performs up to its capabilities each season. Failure to perform the proper preventative maintenance for long-term storage – wherever you’re storing your Sea-Doo – can have costly consequences.

How do you winterize a Sea-Doo Bombardier jet ski?


How much antifreeze Do I need to winterize a Sea-Doo?

Produce a two gallon mix of antifreeze and water in a five gallon bucket and using a hose or using a water pump or bilge pump attaché to the flush outlet and start the watercraft engine.

What happens if you don’t winterize your jet ski?

Top it Off. Untreated gas can eat away at your gas tank and hoses. It can cause gas contamination, necessitate replacement of hoses or the gas tank and may even destroy your engine.

How do you prepare a jet ski for winter?

Winterize Jet Skis

  1. Drain The Water. Right after you take your PWC out of the water for the season, we advise you drain the excess water from its cooling system. …
  2. Clean Your Toy. …
  3. Fill & Lubricate Your PWC. …
  4. Oil Your Jet Ski. …
  5. Remove The Battery. …
  6. Safely Store Your PWC. …
  7. Keep Your Jet Ski in Peak Condition with the Help of Jet Dock.

How do you run antifreeze through a jet ski?


How do you store a Sea-Doo in the winter?

If you plan on storing your watercraft outside, cover it with an opaque, breathable tarp or Sea-Doo cover. This will protect your Sea-Doo from damaging sun rays and keep it dust and grime free for next season.

What coolant can I use in my Sea-Doo?

XPS Antifreeze/Coolant contains the correct dilution and the necessary additives to prevent corrosion and inhibit cavitation in BRP cooling systems. Long-life, 5-year formula specially formulated for BRP vehicles. Superior heat transfer.

How much does it cost to winterize a jetski?

It is going to cost about $700 to have your jet ski winterized. The price will change depending on where you live and the services you are requesting. This is an average price you will pay, and of course, there will be other factors which could play into the price.

What is a fogging kit for Sea-Doo?

This is a smart solution to save your Sea Doo engine valves. Designed and made by Seadoo Centre, the fogging kit will help prevent corrosion build up on the valves of your 4 stroke Seadoo. This is achieved by coating the valves with oil via the fogging system after every day of riding.

How do you fog a Sea-Doo engine?

Remove the air filter on your jet ski, then spray the carburetor and spark plug cylinders with fogging oil. The best way to tackle this is to turn on the engine and spray it down while the engine in idling, until the engine stalls. Remove your spark plugs, and spray fogging oil into each hole for a couple of seconds.

Can you run a Sea-Doo out of water?

You can run a Sea-Doo out of the water while it’s attached to supplying water. Be careful, as unlike other manufacturers, Sea-Doo recommends that you never run the engine without supplying water. But even if it’s flushed with running water, a Sea-Doo can be run for no longer than 2 minutes out of the water!

Do Sea-Doos have drain plugs?


Do you need to run antifreeze through jet ski?

The reason you run antifreeze through your jet ski is to replace any water that’s in the engine, exhaust, or intercooler with antifreeze. When water freezes, it expands and can crack metal like your engine, so it’s important you flush with antifreeze.

How much coolant does a Sea Doo take?

Cooling system capacity 3.0 L (3.2 qt (U.S. liq.))

Maybe you are interested in:

how to flush my engine?

Related searches

  1. how to winterize a jet ski 2 stroke
  2. winterizing sea doo rxt 300
  3. how to de-winterize a seadoo jet ski
  4. i never winterize my jet ski
  5. do you have to winterize a sea doo
  6. jet ski winterizing near me
  7. how to winterize a 2006 seadoo rxp
  8. how to fog a seadoo engine

Related Articles

Leave a Reply

Your email address will not be published.

Check Also
Back to top button